The PW-6000 Input Module provides connections for 16 supervised inputs and two
relay outputs. You can either mount the board in a rack or open and flat. If you
rack-mount the board, only one edge is accessible for wiring; however, a flat mount
increases the amount of available I/O slightly but significantly decreases the number
of boards that can be mounted in one enclosure.
Starting at the bottom of the rack-mount side of the board:
• The first connector provides power to the board.
• The next connector provides communication with the Controller (PW6K1IC or
• Continuing up this edge, the next eight connectors provide supervised input
• The last connector on the rack-mount edge provides terminals for one relay
When the board is mounted flat, one additional relay output and two dedicated alarm
inputs for cabinet tamper and power fault detection are provided on the opposite edge
of the board.
Both form-C relay outputs are designed to handle dry-circuit signals. All of the inputs
are capable of four-state supervision by using End-of-Line (EOL) resistor termination
except the two dedicated inputs. Communication to the control panel is accomplished
via an RS-485 interface. This board requires 12 VDC input power.
When communication to the controller is lost, this board maintains all previous output
settings at the time communication was lost.
PW6K1IN - PW-Series 16 Input Module
- Brand: Honeywell
- Product Code: PW6K1IN
- Availability: 2-3 Days